Spa eXact EZ Photometer - Affordable Lab-Quality Results Within Seconds!
Testing spa water has never been so relaxing with the Spa eXact EZ handheld photometer. With the ability to test 7 of the most important spa water parameters, the Spa eXact EZ provides accurate, lab quality results in just seconds! Tests for Total Alkalinity, pH, Free Chlorine (DPD), Combined/Total Chlorine (DPD), Calcium Hardness, & Total Bromine (DPD)
Ideal for customers, who test the water in their spa regularly and want quick and accurate results.
Available in our very convenient: Spa eXact® EZ Photometer Starter Kit
Le photomètre Spa eXact® EZ certifié NSF/ANSI 50 L1 teste 7 paramètres importants de l'eau du spa avec un résultat de qualité de laboratoire. Tous les tests ont été spécifiquement calibrés pour les températures des spas et utilisent nos eXact® Strips brevetés, un système de réactifs rapide et facile pour l'analyse.
Simply dip an eXact® Strip Micro into the water sample for 10 seconds using a simple back and forth motion, discard the strip, and read the results instantaneously!
Détecte :
- Alcalinité totale 20 - 200ppm
- Brome 0.00- 17.0ppm
- Dureté calcique 23 - 700ppm
- Chlore libre 0.00 - 12.0ppm
- Chlore combiné 0.00 - 12.0ppm
- Chlore total 0,00 - 12,0ppmpH 6,0 - 8,4
Détails :
- La coquille est livrée avec des composants de base pour commencer l'analyse de l'eau
- Photomètre Spa eXact® EZ
- Brosse de nettoyage
- Manuel d'utilisation
- Réactifs emballés individuellement (6 tests chacun)
- *Case de transport et flacons de réactifs NON inclus
- 4.25"L x 7.25"H x 2.25"P | 10.8oz
Spa eXact® EZ Photometer Overveiw
Recommended Parameter Levels for Spas
Bromine in Spas-Recommended bromine levels in the UK for pools and spas are 4.0 – 6.0 mg/L with shock dose of 10 mg/L.
Calcium Hardness in Spas – Calcium hardness should be measured once a week, and a level between 80 – 200 mg/L maintained.
Chlorine (Free and Total) in Spas – If chlorine is being used in a well-designed spa you should be looking for a free chlorine residual of 3.0 – 5.0 mg/L. The combined chlorine should be as low as possible and certainly less than half the free and never more than 1 mg/L.
Cyanuric Acid in Spas – Levels should be below 200 mg/L, with many authorities suggesting levels between 25 and 50 mg/L are ideal.
pH in Spas – Ideally you are looking for a pH of 7.2 – 7.4, an overall range of 7.0 – 7.6 is acceptable in most spas.
Phosphate in Spas – The level of total phosphates in the spa water should be 0.01 mg/L or below.
Total Alkalinity in Spas – Levels should be in the range 80 – 200 mg/L CaCO3.
Turbidity in Spas – The level of turbidity should be 0.5 NTU (Nephelometric Turbidity Units) or less.